Xerox WorkCentre PE16-i-3113 - Manual (Page 14)

14 I NSTALLATION AND SETUP
S
ETTING UP YOUR SCANNER WITH
O
MNI
P
AGE
SE
All files needed for scanner setup and support are copied automatically
during the program’s installation. Before using OmniPage SE for
scanning, your scanner should be correctly installed and tested for correct
functionality.
Scanner installation and setup are done through the Scanner Wizard. You
can start this yourself, as described below. Otherwise, the Scanner Wizard
appears when you first attempt to perform scanning from OmniPage SE.
Please follow these steps to use the Scanner Wizard to setup your scanner
with OmniPage SE:
u Choose Start
ÉProgramsÉScanSoft OmniPage SEÉ Scanner
Wizard
or click the Setup button in the Scanner panel of the Options
dialog box.
or choose a scan command in the Get Page drop-down list in the
OmniPage Toolbox.
u Choose Select scanning source, then click Next.
u Click once on your scanner’s TWAIN driver to select it, then
click Next.
u Choose Yes to test your scanner configuration, then click Next.
u The wizard will now test the connection from the computer to
your scanner. Click on Next.
u Insert a test page into your scanner.
u The wizard is now prepared to do a basic scan using your scanner
manufacturer’s software. Click on Next.
Note
In OmniPage Pro 11, Text-to-Speech is available for English
(British and US), French, German, Italian, Portuguese or Spanish. This is
not available in OmniPage SE. See also the section Reading text aloud in
chapter 4.