Konica Minolta bizhub 36 - Manual (Page 99)

bizhub 42/36 10-12
10.4 Parameter details 10
Reference
- For printing from the tray 1, if you use a paper size and a paper type different from the ones specified
on the machine’s [Paper Settings] for the tray 1, select [Tray 1 (Manual Feed)] and send a print job. Then
check that paper is loaded in the bypass tray, and print by operating the touch panel of the control pan-
el. If you print selecting [Tray 1] and using any paper other than the one specified for the tray 1 on the
machine, even though the correct size of paper is loaded, print position may be shifted or paper jam
may occur at the exit section.
- If you select [Auto] in [Paper Tray], paper is fed in the priority order of Tray 1 (Bypass Tray), Tray 2, Tray
3, Tray 4, and Tray 5.
- If you turn off and on the power switch of the machine, jobs except for the ones stored with the [Store
Job] or [ID & Print] option are deleted from the HDD.
- To use paper of which the size is other than the standard sizes, specify the custom paper size. You can
register a custom size by selecting [Custom Size] from the paper size or original size option.
- Specify [Side2] when printing on the back side of paper.
- When printing as [Manually Print on 2nd Side], use paper that has been printed on with this printer. In
addition, the page printed with this setting is not guaranteed.
d
Reference
For details on the paper sizes loadable in the paper trays, refer to the [User's Guide Copy Operations].
For details on the [Job Retention], refer to page 13-2.
[User Settings...] − Click this button to specify a job name and set a pass-
word for secured jobs.
[Authentica-
tion/Account
Track...]
−
Click this button to specify the user name and pass-
word when [User Authentication] is enabled on this ma-
chine, or the account name and password when
[Account Track] is enabled on this machine.
[Copies] 1 to 9999 Specify the number of copies to be printed.
[Collate] ON/OFF Select this check box to collate pages sequentially
when printing multiple sets of copies.
[Offset] ON/OFF Select this check box to stagger each set when printing
multiple sets of copies.
[Manually Print on
2nd Side]
−
Select this check box to print on the 2nd side of sheet
where the 1st side is already printed.
This setting is available if [Paper Tray] is set to [Tray 1
(Manual Feed)], [Tray 1], or [Tray 2].
Function Name Option Description