beautypg.com

3 setup procedure, 1 for network connection, 2 for local connection – Konica Minolta bizhub 36 User Manual

Page 18: Setup procedure -8, For network connection -8, For local connection -8

background image

bizhub 42/36

2-8

2.3

Setup procedure

2

2.3

Setup procedure

To use this printing system, you must complete the setup in advance.

The setup refers to a series of procedures for connecting the machine to the computer and installing the print-
er driver to the computer.

Perform the setup using the following procedures.

2.3.1

For network connection

1

Connect this machine to the computer.

2

Check that the computer to be used is connected to the network.

3

Specify the IP address of this machine, and then connect it to the network.

4

Change the network settings for this machine according to the connection method or protocol.

% LPR: In [TCP/IP Settings], enable LPD. (LPD is enabled in the initial setting.)

% Port9100: In [TCP/IP Settings], enable the RAW port and specify the RAW port number ([9100] in

the initial setting).

% IPP/IPPS: In [IPP Settings], enable IPP printing. To use IPPS printing, install the certificate in ad-

vance.

% Web Service Print: In [Web Service Settings], enable the [Print Function].

% Bonjour: In [Bonjour Setting], enable Bonjour.

% AppleTalk: In [AppleTalk Settings], enable AppleTalk.

5

Install the printer driver.

% Specify the network port for the printer driver according to the connection method or protocol.

Reference

-

After installing the printer driver, perform test print to make sure that the connections are made prop-
erly.

d

Reference

For details on the connectable interfaces, refer to page 2-7.

For details on the network settings, refer to the [User's Guide Administrator Operations].

The procedure for installing the printer driver varies depending on the connection method, operating system
of the computer, and printer driver. For details, refer to page 3-2.

To update an existing printer driver, uninstall it first. For details, refer to page 9-2.

Configure the interface timeout settings in the PageScope Web Connection if necessary. For details, refer
to the [User's Guide Administrator Operations].

2.3.2

For local connection

1

Connect this machine to the computer.

2

Install the printer driver.

This manual is related to the following products: