2 user settings, 1 [print settings, Paper settings – Konica Minolta bizhub 36 User Manual
Page 156: User settings -3, Print settings] -3 [paper settings] -3, 1 [print settings] [paper settings
bizhub 42/36
14-3
14.2
User settings
14
14.2
User settings
14.2.1
[Print Settings]
[Paper Settings]
Specify settings for the paper and paper trays.
%
Press the Utility/Counter key ö[User Settings] ö [Print Settings] ö [Paper Settings].
Settings
[Paper Tray
Settings]
[Default Tray]
Select the paper tray that is given priority.
[Tray 4] and [Tray 5] do not appear if the optional Paper Feed Cabinet
PC-211 have not been installed.
[Tray 1]
[Size Detec-
tion Mode]
Select whether or not to automatically detect the
size of paper loaded in the tray 1.
[Paper Size]
Select the size of paper loaded in the tray 1.
If [Size Detection Mode] is set to [Auto], the size of
paper loaded in the tray 1 is automatically selected.
You cannot change the size to other sizes from the
control panel.
[Custom Size]
Press [Width] and [Length], and then type in the pa-
per size.
These settings can be specified if [Paper Size] is set
to [Custom].
[Paper Type]
Select the type of paper loaded in the selected tray.
[Tray 2]
[Paper Size]
Display the size of paper loaded in the tray 2.
The detected paper size is automatically selected,
so the size cannot be changed to other sizes from
the control panel.
[Paper Type]
Select the type of paper loaded in the selected tray.
[Tray 3]
[Paper Size]
Display the size of paper loaded in the tray 3.
The detected paper size is automatically selected,
so the size cannot be changed to other sizes from
the control panel.
[Paper Type]
Select the type of paper loaded in the selected tray.
[Tray 4]
[Paper Size]
Display the size of paper loaded in the tray 4.
The detected paper size is automatically selected,
so the size cannot be changed to other sizes from
the control panel.
[Paper Type]
Select the type of paper loaded in the selected tray.
[Tray 5]
[Paper Size]
Display the size of paper loaded in the tray 5.
The detected paper size is automatically selected,
so the size cannot be changed to other sizes from
the control panel.
[Paper Type]
Select the type of paper loaded in the selected tray.