2 [configure] tab, Configure] tab -4 – Konica Minolta bizhub 36 User Manual
Page 91
bizhub 42/36
10-4
10.2
Default settings of the printer driver
10
10.2.2
[Configure] tab
Specify the model name used and presence or absence of the installed options, user authentication and ac-
count track functions, and then allow the printer driver to use the functions of the machine.
Reference
-
The machine type and option in [Device Option] are specified automatically if [Acquire Settings...] is set
to [Auto]. If [Auto] is not enabled, be sure to specify the machine and option manually or using [Acquire
Device Information].
-
The function of [Acquire Device Information] is available only when your computer is connected to and
can communicate with the machine.
Item Name
Functions
[Device Option]
Configure the model name of the machine and the status of the installed
printer options and user authentication/account track. Specify the status of
each item in the [Setting] box.
[Acquire Device Informa-
tion]
Click this button to communicate with this machine and load the status of the
installed options.
[Acquire Settings...]
Click this button to configure conditions such as the destination when you
perform [Acquire Device Information].
When automatically acquiring device information, enable [Auto].
[Software Tools]
Allows you to start up the software tools such as PageScope Web Connec-
tion.