Konica Minolta bizhub 36 - Manual (Page 53)

bizhub 42/36 6-2
6.1 Installing the printer driver 6
6 Installation on Macintosh Computers
This chapter describes the settings necessary when using Macintosh and the procedure for installing printer
drivers for Macintosh.
6.1 Installing the printer driver
1
Start the Macintosh computer.
2
Insert the Drivers CD-ROM into the CD-ROM drive of the computer.
% Exit all running applications, if any.
3
Open the folder in the CD-ROM that contains the desired printer driver.
% Select a folder according to the printer driver, operating system, and language to be used.
4
Copy the driver file onto the desktop according to the Mac OS version.
% OS X 10.2: bizhub 42_36_102.pkg
% OS X 10.3: bizhub 42_36_103104.pkg
% OS X 10.4: bizhub 42_36_103104.pkg
% OS X 10.5: bizhub 42_36_105.pkg
% OS X 10.6: bizhub 42_36_106.pkg
% OS X 10.7: bizhub 42_36_106.pkg
% For OS X 10.5/10.6/10.7, the driver folder varies depending on the paper size. Select the appropriate
driver folder for your environment.
To use metric-based paper size (A4 and the like): "WW_A4" folder
To use inch-based paper size (8 1/2 e 11 in letter size): "WW_Letter" folder
5
Double-click the file copied onto the desktop.
The installer starts.
% To cancel installation, press [Cancel].
6
Click [Continue] following the instructions on the pages that follow until the [Installation] page appears.
% When the name and password prompt appears during the procedure, enter the administrator name
and password.
7
In the [Installation] page, click [Install].
The printer driver is installed in the computer. When the installation is completed, a message appears.
% For OS X 10.2/10.3/10.4, when the printer driver is installed for the second and subsequent times,
[Install] may change to [Upgrade].