Konica Minolta bizhub 36 - Manual (Page 128)

bizhub 42/36 12-5
12.2 Default settings of the printer driver 12
12.2.3 [General]
Reference
- The [Staple] function is available only if the optional Finisher FS-529 is installed.
12.2.4 [Image Options]
Function Name Option Description
[Nearest Size and Scale] [On]/[Off] If no paper tray contains paper of the specified size, the
page is automatically enlarged or reduced and paper of
the most appropriate size is selected.
[Resolution] [High Quality] Displays the image resolution (High Quality) for printing.
[Paper Type] Paper types avail-
able for the ma-
chine Select a paper type to be used for printing.
[Paper Source] Auto, Tray 1
(Manual Feed),
Tray 1 to Tray 5 Select a paper tray to be used.
Selectable items vary depending on the option installa-
tion status.
[Orientation] [Portrait]/[Land-
scape] Select the orientation for the original.
[Manually Print on 2nd
side] [On]/[Off] Select whether or not to print on the back side of paper
that has already been printed on.
[Paper Sizes] The paper sizes
registered as the
standard paper
sizes and custom
sizes that can be
used with the ma-
chine Specifies the paper size.
[Collate] [On]/[Off] Select to collate pages sequentially when printing mul-
tiple sets of copies.
[Binding Position] [Left Bind], [Top
Bind], [Right Bind] Specify the binding position.
[Offset] [On]/[Off] Select to stagger each set when printing multiple sets
of copies.
[Print Type] [1-Sided]/[2-Sid-
ed] Specify 1-Sided/2-Sided print.
To save paper, 2-Sided print is the default setting.
[Staple] [Off], [Left Cor-
ner], [Right Cor-
ner], [2 Position] Select to specify stapling.
[Brightness] [-15%], [-10%], [-
5%], [0%], [5%],
[10%], [15%] Specifies the brightness of the printing image.
[Edge Strength] [Off], [Low], [Mid-
dle], [High] Select to emphasize edges and specify the strength of
the edge enhancement dot to be used.
Select [Low] to use weak edge enhancement dots.
Select [Middle] to use normal edge enhancement dots.
Select [High] to use strong edge enhancement dots.
[Toner Save] [On]/[Off] Select this check box to adjust the printing density in
order to save the amount of toner consumed.
Function Name Option Description
[Image Halftone] [Line Art], [Detail],
[Smooth] Specifies the halftone for printing image.
[Image Edge Enhance-
ment] [On]/[Off] Select whether image edges are emphasized.