Konica Minolta bizhub 36 - Manual (Page 28)

bizhub 42/36 4-3
4.2 Easy installation procedure using the installer 4
4.2 Easy installation procedure using the installer
4.2.1 Settings of this machine
Before you can use this machine through the network connection, you must configure the network settings
for this machine.
TCP/IP settings for the machine
In [TCP/IP Settings] of this machine, specify the IP address.
d
Reference
When this machine is connected through the network, you must previously specify the IP address on this
machine so that it can be detected automatically. For details, refer to [User's Guide Administrator Opera-
tions].
RAW port number/IPP setting for the machine
Change the network settings for this machine according to the connection method or protocol.
- Port9100: In [TCP/IP Settings], enable the RAW port and specify the RAW port number ([9100] in the
initial setting).
- IPP: In [IPP Settings], enable IPP printing.
d
Reference
For details on TCP/IP setting and IPP setting for this machine, refer to [User's Guide Administrator Opera-
tions].
4.2.2 Installing the printer driver
1
Insert the Drivers CD-ROM into the CD-ROM drive of the computer.
% Make sure that the installation program starts.
% If the installation program does not start, double-click [AutoRun.exe].
% When installing the driver on a Windows Vista/7/Server 2008/Server 2008 R2-based computer, click
[Allow] or [Continue] if the [User Account Control] window appears.
2
Click [Printer / FAX].
The printer/FAX driver installer starts.
3
To agree with all terms in the license agreement, click [AGREE].
% If you disagree, you will not be able to install the driver.
% In the language display box, you can change the language used with the installer as required.