Konica Minolta bizhub 36 User Manual

Page 157

bizhub 42/36

14-4

14.2

User settings

[Duplex]

Select whether pages are printed double-sided.

[Copies]

Specify the number of copies to be printed.

[Finishing]

[Collate]

Select whether or not to enable collated (sort) printing.

[Binding Posi-
tion]

Specify the default binding position for 2-sided printing.

[Offset/Staple]

Select offset or staple.
When selecting staple, specify the staple position.

[Auto Tray
Switching]

If [ON] is selected and the specified tray runs out of paper during printing, a tray loaded
with paper of the same size is automatically selected so printing can continue.
If [OFF] is selected and the specified tray runs out of paper, printing stops.

[Tray Map-
ping]

[Tray Mapping
Mode]

Select whether or not the Tray Mapping function is used.

[Logical Tray 0]

Select the tray that is used for printing when a print job is received
from another manufacturer’s printer driver.

Reference

For [Logical Tray 1], the default value is [Physical Tray 1].

[Logical Tray 1]

[Logical Tray 2]

[Logical Tray 3]

[Logical Tray 4]

[Logical Tray 5]

[Logical Tray 6]

[Logical Tray 7]

[Logical Tray 8]

[Logical Tray 9]

Settings

This manual is related to the following products:

bizhub 42