Konica Minolta bizhub 36 - Manual (Page 17)

bizhub 42/36 2-7
2.2 Operating environment 2
2.2.2 Interfaces used for connection
To connect this printing system to a computer, the following interfaces can be used.
Ethernet
Use this interface to use this printing system via a network connection.
It supports 1000Base-T, 100Base-TX, and 10Base-T standards. In addition, TCP/IP (LPD/LPR, IPP, SMB),
Web services, IPX/SPX (NetWare), AppleTalk (EtherTalk) protocols are supported.
USB interface
Use this interface to use this printing system via a USB connection. A USB cable is required for connection.
Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring three meters or less is
recommended.
Connection diagram
The printer cables are connected to each port on this machine.
Back side of the machine
1. USB port
2. Ethernet port (1000Base-T/100Base-TX/10Base-T)
2
1