Konica Minolta bizhub 36 - Manual (Page 101)

bizhub 42/36 10-14
10.4 Parameter details 10
Reference
- The options "2 e 2, 3 e 3 and 4 e 4" for [Combination], which are for printing a sheet of original onto
multiple sheets of paper, are available only for the PCL driver.
- The [Skip Blank Pages] function is available for the PCL/XPS drivers.
- The positions of binding margins vary according to the [Binding Position] setting.
10.4.5 [Finish] tab
Reference
- The [Staple] function is available only if the optional Finisher FS-529 is installed.
[Image Shift Set-
tings...] [Unit] Select a unit to be used for specifying the size.
[Front Side]/[Back Side] Specify the shift direction and values.
Specify the print position of a document in increments
of 0.1 mm or 0.01 inch.
Function Name Option Description
Function Name Option Description
[Staple] ON/OFF, Left Cor-
ner/Right Corner/2 Posi-
tion (Left)/2 Position
(Right)/2 Position (Top) Select this check box to specify stapling.
From the drop-down list, specify the number of staples
and the stapling position.