Konica Minolta bizhub 36 - Manual (Page 110)

bizhub 42/36 11-2
11.1 Print operations 11
11 Print Functions of Mac OS X
This chapter describes the functions of the PS printer driver for OS X.
11.1 Print operations
Print jobs are specified from the application software.
1
Open the data in the application, and click [File]. Then click [Print] from the menu.
% If the menu is not available, click [Print].
The [Print] window appears.
2
Check that the desired printer name is selected in [Printer:].
% If the target printer is not selected, select it.
% If the printer does not appear, select the printer from [Print & Fax], [Print & Scan], [Printer Setup Util-
ity] or [Print Center]. For details, refer to page 6-4 and page 6-11.
% The [Print] window varies depending on the application software or the version of the operating sys-
tem.
% The printer name can be changed if necessary. The following window shows an example where the
printer name is changed to "Printer Name".
3
Specify the print range and the number of copies to print.
% When the setting items are not displayed in OS X 10.5/10.6, click on the right side of [Printer:].
% When the setting items are not displayed in OS X 10.7, click [Show Details].
4
Switch the setting window as necessary to change the printer driver settings.
% When you change the pop-up menu of the print options, another setting window of the printer driver
appears, allowing you to configure various functions. For details, refer to page 11-6.
% The printer driver settings changed in the [Print] window are not saved, and the original settings are
restored when you exit the application.
5
Click [Print].
Printing is executed and the data indicator of the machine flashes.
Setting
items
Printer
options