Konica Minolta MAGICOLOR 2300 - Manual (Page 98)

Clearing Media Jams 88
Tray 1 (Multipurpose Tray)
1
Remove the media from Tray 1.
2
Carefully remove the jammed media.
3
Fan the removed media to prevent
static buildup and even up the front
edges.
"#
Do not fan transparencies
before loading them. Resulting
static electricity may cause
printing errors.
4
Reinsert the media printing face up.
Make sure the media is lying flat and doesn’t exceed the media limit mark.
Check to see if the media width guides are correct.
5
Open the right-side door, then close it.
The media jam message is no longer displayed in the printer message
window.
Tray 2 (Optional Lower Feeder Unit Media Tray)
1
While pressing in the tabs on each
side of the media tray, remove the
media tray.