Konica Minolta MAGICOLOR 2300 - Manual (Page 100)

Clearing Media Jams 90
Inside the Printer
Media Path Jam
1
Pull the right door release lever, and
then carefully open the right door. If Tray
2 is installed, the lower-right door opens
at the same time that the right door is
opened.
Attention
Do not pull jammed media from the
top of the printer through the fuser
unit; otherwise, unfused toner may
dirty the fuser rollers.
If it is difficult to remove the jammed
media, turn the misfeed-clearing dial
counterclockwise to feed the media
downward.
2
If a misfeed occurs in the vertical
transport area, open the inner media
guide, and then pull the misfed media
down to remove it.
3
Close the inner media guide.