Konica Minolta MAGICOLOR 2300 - Manual (Page 164)

Engine and Controller Specifications 154
Electrical
Voltage and Power
Current
RAM Type: PC-100- or PC-133-Compliant SDRAM DIMMs
Base system RAM: 32 MB
Total RAM: Upgradable to 288 MB
Optional RAM 128 and 256 MB DIMMs
For information about DIMMs recommended for
your printer, see the magicolor 2300 DL Answer
Base through the Internet at
printer.konicaminolta.net/support
, or contact
Technical Support. See the Service & Support
Guide for a list of sources of service and support in
the Americas. The most up-to-date worldwide
information can be found at www.konicaminolta.net/
printer/.
Voltage and
frequency Japan: 100 volts ±10% at 50/60 Hz ±3 Hz
US: 120 volts ±10% at 50/60 Hz ±3 Hz
International: 220–240 volts +10/-15% at 50 Hz ±3 Hz
Phase Single
Power
consumption Mode Average Maximum
Black monochrome
printing
Color printing
Standby
Power saver
600 W or less
450 W or less
250 W or less
30 W or less
1100 W or
less
Certification ENERGY STAR compliant
Mode Average
Operation (100 V)
Operation (120 V)
Operation (220–240 V)
Rush Current 13.0 A or less
11.0 A or less
7.0 A or less
50 A or less (0-Peak)