Konica Minolta MAGICOLOR 2300 - Manual (Page 142)

Storing the Printer 132
Attention
Failure to follow these instructions could result in voiding your
warranty.
Storing the Printer
Unplug the printer when storing it for an extended period. Protect it from
extremes in temperature and humidity, and from dust.
Relocating Your Printer
Occasionally, you may have to move your printer to a different location, either
nearby or to a distant location. To avoid damage to your printer, we advise
you to follow the next instructions very carefully.
1
Turn off your printer.
2
Remove the power cord and all interface cables.
3
If you are moving to a distant location, follow the instructions for repacking
the printer (see page 133).
4
Relocate the printer.
Attention
Your printer weighs approximately 62 lbs (28 kg). Be sure to have help
when lifting and moving it.
5
Unpack and set up the printer in its new location.
Use the unpacking and setup instructions in the Installation Guide.
6
Reconnect the power cord and all interface cables.
"#
We strongly suggest that you save the packaging materials in case
you ever need to move or ship the printer, and that you order the
KONICA MINOLTA 2300 Series Repacking Kit 2600733-100.
You can also refer to the Service & Support Guide for sources of service and
support in many areas of the world. The most up-to-date worldwide
information can be found at www.konicaminolta.net/printer/.