Konica Minolta MAGICOLOR 2300 - Manual (Page 43)

Configuration Menu Overview 33
MENU/ENGINE Submenus
ENGINE/CHANGE TONER SZ
CHANGE TONER SZ
CYAN
CHANGE TONER SZ
MAGENTA
CHANGE TONER SZ
YELLOW
CYAN
STANDARD CYAN
HIGH
CAPACITY MAGENTA
STANDARD MAGENTA
HIGH
CAPACITY YELLOW
STANDARD YELLOW
HIGH CAPACITY
ENGINE/REPLACE TONER
REPLACE
TONER
BLACK
REPLACE TONER
YELLOW
REPLACE TONER
MAGENTA
REPLACE TONER
CYAN
BLACK
TONER
SIZE:HIGH
YELLOW
TONER
SIZE:HIGH YELLOW
TONER SIZE:
STANDARD MAGENTA
TONER
SIZE:HIGH MAGENTA
TONER SIZE:
STANDARD CYAN TONER
SIZE:HIGH CYAN
TONER SIZE:
STANDARD
ENGINE/TONER EMPTY ENGINE/ENERGY SAVER*
TONER
EMPTY
STOP TONER
EMPTY
CONTINUE
ENERGY
SAVER SET
15 MINUTES ENERGY
SAVER SET
30 MINUTES
ENERGY
SAVER SET
1 HOUR
ENERGY
SAVER SET
2 HOURS
ENERGY
SAVER SET
OFF
Products for North America only.
ENGINE/AUTO CONTINUE ENGINE/CHAINING TRAY XXX
AUTO
CONTINUE
SET ON
AUTO
CONTINUE
SET OFF CHAIN TRAY
SET ON
CHAIN TRAY
SET OFF
ENGINE/SERVICE
FACE COUNT
XXXXXX
CONTROLLER
VER. XX.XXX ENGINE VER.
XXXX.XXXX.
XXXX SERVICE
DIMM TEST
SERVICE
SDRAM
TEST
SERVICE
POWER ON
TEST
RESET
COUNTER
TRANSFER
UNIT RESTORE
USER
DEFAULT
Defaults are bolded.
* To disable Energy Saver from the ENGINE/ENERGY SAVER menu, press and hold the Menu/Select key
and down arrow at the same time for approximately three seconds. Once the display reads OFF, release
the two keys and press the Menu/Select key to select the Off option. In order to turn the Energy Saver
back on, go to the Energy Saver menu and make another selection or select ENGINE/SERVICE/
RESTORE USER DEFAULT.