Konica Minolta MAGICOLOR 2300 - Manual (Page 110)

Solving Other Problems 100
Booklet Left
and Right
Binding
output is
incorrect. Both the driver and
the application have
been set for collation. For Booklet Left Binding and Booklet
Right Binding, choose Collate only in
the driver’s Paper Tab. Do not set
collation in the application.
The printer
pauses
approxi-
mately 90
seconds. The printer pauses
for the color
calibration procedure
(also known as the
Auto-Image Density
Control [AIDC] cycle).
This process is
provided to make
sure reliable printer
operation with
optimum output
quality. If you open
the door before the
display reads
IDLE/
MAGICOLOR
2300DL
, the printer
stops and repeats the
calibration cycle.
Wait while your printer automatically
pauses to do an AIDC calibration cycle
after 200 1-sided pages of a
continuous print run.
The printer
pauses
approxi-
mately 150
seconds. The printer pauses
for the color
calibration procedure
(also known as the
Auto-Image Density
Control [AIDC] cycle).
This process is
provided to make
sure reliable printer
operation with
optimum output
quality. If you open
the door before the
display reads
IDLE/
MAGICOLOR
2300DL
, the printer
stops and repeats the
calibration cycle.
Wait while your printer automatically
pauses to do an AIDC calibration cycle
after rebooting your printer when there
has been an environmental change
such as in temperature or humidity.
Wait while your printer automatically
pauses to do an AIDC calibration cycle
after “waking up” from ENERGY
SAVER with more than 1,000 pages
since the last AIDC cycle.
Wait while your printer automatically
pauses to do an AIDC calibration cycle
after the installation of a new toner
cartridge or OPC drum.
Symptom Cause Solution