Output tray, Media storage, Output tray 26 media storage 26 – Konica Minolta MAGICOLOR 2300 User Manual
Page 36
Output Tray
26
2
Set the driver for the duplex layout you prefer.
Long Edge creates a document that flips horizontally as in a loose-leaf
notebook; Short Edge creates a document that flips vertically, as on a
clipboard.
3
Click
OK
.
Output Tray
All media is output to the output tray on top of the printer. The face-down
output tray has a capacity of 200 sheets of 22 lb (80 g/m
2
) bond paper.
"#
If the media is stacked too high, your printer may experience media
jams, excessive media curl, or static buildup.
"#
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
Media Storage
How do I store media?
!
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time without staying in its packaging
may dry up too much and cause jamming.
!
If media has been removed from its wrapper, place it in its original
packaging and store in a cool, dark place on a level surface.
!
Avoid moisture, excess humidity, direct sunlight, excess heat (above
95° F/35° C), and dust
!
Avoid leaning against other objects or placed in an upright position
Before using stored media, do a trial printing and check print quality.