Konica Minolta MAGICOLOR 2300 - Manual (Page 87)

Cleaning the Printer 77
2
Clean the feed rollers by wiping them
with a soft, damp cloth that has been
wrung out well.
3
Close the duplex option door.
Tray 2 (Optional Lower Feeder Unit) Media Rollers
1
Turn off the printer, unplug the power
cord, and disconnect all interface
cables.
2
Remove the media from Tray 2.
3
Remove the waste toner bottle.
"#
The waste toner bottle
contains waste toner. Be
careful not to tilt the bottle
while removing it.
4
Hold the waste toner bottle vertically,
and then plug the two openings with
the caps.
"#
Place the removed waste toner bottle, with the openings facing up,
on a stable surface (not the printer).
"#
Removing the waste toner bottle first will permit a clearer view of
the brackets.