Konica Minolta MAGICOLOR 2300 - Manual (Page 24)

Media Types 14
Do not use thick stock that is
! Mixed with any other media in the media trays (as this will cause printer
jamming)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these
layered regions may be lost or faded.
Use envelopes that are
! Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"#
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
! Approved for laser printing
! Dry
! Printed on the front address side only
Do not use envelopes that have
! Sticky flaps
! Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for
sealing
Driver
Mode Thick stock
Weight 25–43 lb bond (91–163 g/m²)
Duplexing Not supported
Notes 43 lb (163 g/m²) bond is also referred to as 90 lb index stock.
Capacity Tray 1 Up to 50 envelopes, depending on their thickness
Tray 2 Not
supported
Orientation Face up
Type
Check printer.konicaminolta.net/support (click on
Answer Base) for currently approved media. To order
approved media, go to www.q-shop.com.
Driver
Mode Envelope
Weight 25–43 lb bond (91–163 g/m²)
Duplexing Not supported