Konica Minolta MAGICOLOR 2300 - Manual (Page 149)

Repacking the Printer 139
2
Grasp the release lever on the OPC drum
cartridge, and then pull the cartridge
straight out about 6 inches (152 mm).
Attention
The OPC drum is extremely sensitive to bright light and direct sunlight.
Any exposure to light should be avoided, or permanent damage could
result.
Any damage resulting from mishandling of the OPC drum will void the
warranty of the OPC drum.
Also, handle the cartridge carefully by its sides so you don’t touch the
surface (the green part) of the drum. The drum is also extremely
sensitive to hand oils and scratches, both of which reduce print quality.
3
Support the bottom of the drum with your
hand, then carefully pull the cartridge
toward you and remove it.
4
Place the OPC drum cartridge in the
protective bag supplied in the repacking
kit (KONICA MINOLTA 2300 Series
Repacking Kit 2600733-100).