Konica Minolta MAGICOLOR 2300 - Manual (Page 31)

Loading Media 21
2
Adjust the media guides to fit the appropriate
media sizes.
Squeeze the front media guide to open the
media guides.
3
Load the media face up, short edge (or
letterhead) first.
Often, an arrow on the paper package
label indicates the face-up (printing) side
of the paper.
"#
A fill limit mark is provided on the
inside of the media guides on Tray
1 (the multipurpose tray). Tray 1
holds 200 sheets of 22 lb bond (80
g/m²) paper.
4
Slide the media guides up against the
edge of the media.
Attention
Always adjust the media guides after inserting the media. A guide
that is not properly adjusted can cause poor print quality, media
jams, or printer damage.