Konica Minolta MAGICOLOR 2300 - Manual (Page 23)

Media Types 13
! Cold-water-transfer paper
! Pressure sensitive
! Designed specifically for inkjet printers (superfine paper, glossy paper,
glossy film, postcards, etc.)
! Already been printed on by another printer, copier, or fax machine
! Dusty
! Wet (or damp)
"#
Keep media between 35% to 85% relative humidity. Toner does
not adhere well to moist or wet paper .
! Layered
! Adhesive
! Folded, creased, curled, embossed, warped, or wrinkled
! Perforated, three-hole punched, or torn
! Too slick, too coarse, too textured
! Different in texture (roughness) on the front and back
! Too thin or too thick
! Stuck together with static electricity
! Composed of foil or gilt; too luminous
! Heat sensitive or cannot withstand the fusing temperature (356° F/180° C)
! Irregularly shaped (not rectangular or not cut at right angles)
! Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
! Acidic
! Any other media that is not approved
Thick Stock
Paper thicker than 24 lb (90 g/m 2 ) bond is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity Tray 1 Up to 50 thick stock sheets, depending on their
thickness. Thick stock is supported only in letter,
A4, or smaller media sizes.
Tray 2 Not supported
Orientation Face up
Type
Check printer.konicaminolta.net/support (click on
Answer Base) for currently approved media. To order
approved media, go to www.q-shop.com.