Lenovo ThinkPad R50p - Manual (Page 99)

The parameters for CREATSP are:
Table 27.
Parameters Description
size=x Size of service partition to create, in
megabytes.
drive=x The drive number to create the service
partition on. If not specified, the first
non-USB drive is used. This parameter is
optional.
/y Suppresses confirmation of the drive being
cleaned. This parameter is optional.
Note: The bmgr32.exe file must be in the same directory as the createsp.exe file,
and should be run from WinPE.
eGatherer
The eGatherer command can be found in C:\Program Files\Common
Files\Lenovo\egatherer\egather2.exe.
The egather2.exe creates an EG2 output with the collected information. It can also
create a local XML output file that it stores in the home folder.
Note: The EG2 file is an internal format.
Two XML files will be created, one for the system information and one for the
demographic information. The name of the XML file is created by combining
manufacturer, model-type and serial number. For example: Lenovo-2373Q1U-
99MA4L7.XML, Lenovo-2373Q1U-99MA4L7.DEMOGRAPHICS.XML .
The scanner can be executed from a command-line by using the following
command-line syntax:
egather2.exe [-help] [-batch] [-silent] [-nolimit] [-local] [-listprobes] [-probe
probename probename]
v -help
Show a short help message.
v -batch
Do not show the disclaimer.
v -silent
Do no show anything during operation
v -nolimit
Collect entire event log. The default is the last 500 entries.
v -local
Create a local XML file.
v -listprobes
List the probes available.
v -probe
Run the specified probes.
Appendix A. Administrative tools 91