Lenovo ThinkPad R50p - Manual (Page 115)

Table 35. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup Backup USB Enable or disable ’Backup USB’ as a
selected destination for backup.
Default: Disabled.
Notes:
1. If a service partition backup
fails due to insufficient space,
manually delete partial backups
before attempting another
backup or restoring from the
failed backup.
2. When backing up the service
partition to external media, set
the following registry key before
restoring your system with
Rescue and Recovery:
HKLM\Software\Lenovo\
Rescue and Recovery\
Settings\Backup\
BackupSPNetwork=1
Backup Backup Network Enable or disable ’Backup Network’
as selected destination for backup.
Default: Disabled.
Notes:
1. If a service partition backup
fails due to insufficient space,
manually delete partial backups
before attempting another
backup or restoring from the
failed backup.
2. When backing up the service
partition to external media, set
the following registry key before
restoring your system with
Rescue and Recovery:
HKLM\Software\Lenovo\
Rescue and Recovery\
Settings\Backup\
BackupSPNetwork=1
Backup Local Partition
Number
Set the partition number for
backups on the local drive. Valid
values: 1-100. Default: 1.
Backup USB Partition
Number
Set the partition number for
backups on the USB drive. Valid
values: 1-100. Default: 1.
Backup Second HDD
Partition Number
Set the partition number for
backups on the Second hard disk
drive. Valid values: 1-100. Default:
1.
Appendix A. Administrative tools 107