Lenovo ThinkPad R50p - Manual (Page 101)

Table 28. MapDrv parameters (continued)
Parameter Result
/user Sets the stored encrypted user name for this share.
/NetPath Sets the value output from MapDrv to indicate the actual
connection path.
Using MapDrv
The following examples provide instruction on how to use MapDrv:
To Store network share information for a ThinkVantage Technology product:
This function stores the network share information in the registry to define the
subkey from the main MapDrv registry key. The following command sets the Unc,
User and Pwd values in the registry:
mapdrv /store id> /unc /user /pwd
[/timeout ]
To connect a network share and a ThinkVantage Technology product: The
following command connects to the share using the Unc, User, and Pwd values in
the registry:
mapdrv /connect id> [/s]
To disconnect a network share and a ThinkVantage Technology product: The
following command disconnects the network share for the specified ThinkVantage
Technology if currently connected:
mapdrv /disconnect id>
To display encrypted user name and password strings: The following command
is used to display the network share information saved in the registry key:
mapdrv /view id> /user /pwd
Rescue and Recovery Boot manager control (BMGR32)
The boot manager interface command-line interface is BMGR32. It resides in the
directory C:\Program Files\Common Files\Lenovo\BMGR. The following table
presents the switches and their results for BMGR32.
Table 29. BMGR32 parameters
Parameter Result
/B0 Boot to partition 0 (based on the order in the partition table).
/B1 Boot to partition 1.
/B2 Boot to partition 2.
/B3 Boot to partition 3.
/BS Boot to the service partition.
/BW Boot to the Rescue and Recovery protected partition.
/BWIN Reset request to boot to Predesktop Area. This must be
called prior to booting.
Appendix A. Administrative tools 93