Lenovo ThinkPad R50p - Manual (Page 116)

Table 35. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup Backup Partitions Select the partitions that should be
backed up. This DWORD is a
bitmap of logical drive letters that
should be included in the backup.
Example: To only backup drive c:
and e:, this value should be
0x00000014. Note: Convert your
hexadecimal number to decimal
before entering. Default:
0xFFFFFFFF. Entering a zero has a
meaning similar to the default: Find
all available partitions and back
them up.
Backup Max Backup Size The maximum backup size (in GB).
Valid values are 1-1000. Default:
available free space.
Backup Max Number
Incrementals
The maximum number of allowable
incremental backups. Valid values:
2-31. Default: 5.
Note: If you have completed
backup number 5 and proceed to
complete backup number 6 and
encounter a message that states: You
have reached your defined limit of 5
incremental backups. You may increase
the maximum number of incremental
backups allowed or the oldest
incremental backup will be deleted.
This message is to let you know
that the oldest incremental backup
will not be deleted, but merged to
the next incremental backup.
Backup Encrypt With CSS Enable or disable ’Encrypt With
Client Security Solution’ as a
backup option. This option permits
hardware or static-key encryption.
Default: Disabled.
Backup Resume After Power
Loss
Enable or disable ’Resume After
Power Loss’ as a backup option.
Default: Enabled.
Backup Capture Migration
Info
Enable or disable ’Capture
Migration Info’ as a backup option.
When enabled, with each backup,
data is collected that permits the
System Migration Assistant to
transfer current system settings to
another machine, should the need
arise. Default: Enabled.
Backup Backup SP Second Enable or disable ’Backup SP
Second’ as an option. When
enabled, the system service
partition can be backed up to the
second system drive. Default:
Disabled.
108 Rescue and Recovery 4.2 Deployment Guide