Kodak OFFICE HERO 6.1 - Manual (Page 95)

www.kodak.com/go/aiosupport 89
KODAK OFFICE HERO 6.1 All-in-One Printer
Fax Speed Fast - 33.6K (default)
Medium - 14.4K
Slow - 9.6K Use this setting to reduce the fax
transmission speed of your printer. If you
are having difficulty sending or receiving
a fax or if your fax works intermittently,
then reducing the fax speed to Medium
or Slow may resolve the issue. If you are
using Vonage or Magic Jack, we
recommend that you set the fax speed
to Slow.
Redial if No Answer Yes (default) / No If the fax number you call does not
answer, the printer will redial the number
automatically one time.
Busy Redial
Attempts 0 to 12
(default is 5)
The number of times that the fax will
attempt to redial a busy number.
Disable Call Waiting No (default) / Yes If you have call-waiting service on your
phone line, you can disable it so that an
incoming call does not interrupt your fax
transmission.
Select Yes to disable call waiting, then
enter the call waiting disable code (below).
NOTE: You must enable call waiting
manually after your fax
transmission.
Call-Waiting Disable
Code *70 (default) The printer automatically dials the call
waiting disable code before dialing the
number to which you are sending a fax.
This code disables call waiting for the
duration of the fax, preventing incoming
calls from interrupting your fax
transmission.
The usual code to disable call waiting is
the default *70. If the call waiting disable
code is different in your area, press
OK,
then press to erase the current code.
Use the keypad to enter the correct
code, then press
OK.
Fax Setting Options Description