Accessing the online printer management tool – Kodak OFFICE HERO 6.1 User Manual
Page 24
Online Printer Management Tool
18
www.kodak.com/go/aiosupport
Accessing the Online Printer Management Tool
Access the Online Printer Management Tool in one of the ways described below.
Directly from Home Center Software v7.x or higher
:
1. Open Home Center Software.
2. Select
Printer Tools on a computer with WINDOWS OS, or Tools on a computer
with MAC OS.
3. Make sure that the name of your wirelessly connected printer appears in the
bottom left of the window.
NOTE: A wirelessly connected printer is listed as the name of the printer plus
a number (for example, KodakOFFICEHERO6.1+1002). If a different
printer name appears, click
Select, then choose your wirelessly
connected printer.
4. Under
Tools, select Online Printer Management.
The Online Printer Management Tool opens.
On any printer-supported computer:
1. Get the IP Address of your wirelessly connected printer:
a. On your printer control panel, press
Home.
b. Press
to
select
Network Settings, then press OK.
c. Press
to
select
View Network Configuration
, then press
OK.
NOTE: If you prefer a printout, press
to select
Print Network Configuration,
then press
OK
. A Test Page prints, including the IP Address in the format
xxx.xxx.xxx.xxx.
d. Press
to see the IP Address in the format xxx.xxx.xxx.xxx. (See
network configuration, page 12
2. On your computer, open your preferred Internet browser (such as INTERNET
EXPLORER, FIREFOX, SAFARI, CHROME).
3. Type the printer IP Address in the browser address (URL) bar, then press
Enter.
The Online Printer Management Tool opens in the browser window.