Using default settings to print a picture – Kodak OFFICE HERO 6.1 User Manual
Page 58
Printing
52
www.kodak.com/go/aiosupport
Using default settings to print a picture
Unless you change the default settings, the default for printing pictures is one
4 x 6 in. / 10 x 15 cm picture. (To change the default settings, see Save as Defaults at
the bottom of the table under
Changing the settings and printing pictures, page 53
.)
To print a picture from a memory card or USB-connected device using the default
settings:
1. Load photo paper (see
2. Insert the memory card into the appropriate slot, or connect the digital camera
or portable drive to the front USB port.
IMPORTANT:
Do not use the memory card slot and the USB port at the same time.
3. Press
or
to select the picture you want to print.
4. Press
Start Black to print a black-and-white picture, or Start Color to print a
color picture.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT:
To prevent loss of data from your memory card, camera, or portable drive,
do not remove it from the printer while printing.
memory card slot
front USB port