Copying a photo, Using the default settings to copy a photo – Kodak OFFICE HERO 6.1 User Manual
Page 73
www.kodak.com/go/aiosupport
67
KODAK OFFICE HERO 6.1 All-in-One Printer
Copying a photo
You can copy a photo using the default settings, or you can make adjustments to the
quantity, size, quality, and brightness of your copies.
Using the default settings to copy a photo
The default settings are either the factory default settings (see
), or defaults that you have set on the printer (see Save as Defaults
at the bottom of the table under
Adjusting the settings and copying a photo,
).
To copy a photo using the current default settings:
1. Lift the scanner lid, and place the original photo face down in the right front
corner of the scanner glass.
IMPORTANT:
Do not load photos in the Automatic Document Feeder (ADF).
2. Close the scanner lid.
3. Press
Home.
4. Press
to select
Copy Photo.
5. Press
Start Black to make a black-and-white copy, or press Start Color to make
a color copy.