Kodak OFFICE HERO 6.1 - Manual (Page 90)

Faxing
84 www.kodak.com/go/aiosupport
Connecting to a
Standard or Cable
telephone service If you have Standard or Cable telephone service, connect one end of the phone cord
that came with the printer into the LINE IN port on the back of the printer and the
other end into the wall phone jack.
Connecting to a
Digital Subscriber
Line (DSL) If you have DSL telephone service, connect one end of the phone cord that came
with the printer into the LINE IN port on the back of the printer and the other end
into the DSL filter (available from your DSL provider), which is connected to the wall
phone jack.
NOTE: You must use a DSL filter to transmit fax signals properly to your printer.
DSL filter