Kodak OFFICE HERO 6.1 - Manual (Page 48)

Handling Paper
42 www.kodak.com/go/aiosupport
Loading photo paper
The capacity of the paper input tray is 70 sheets of photo paper.
1. Raise the output tray, and pull out the paper tray.
2. Remove any paper from the tray.
3. Insert the photo paper (short side first) into the tray with the logo side facing up
and the glossy side down.
IMPORTANT: Always load the paper short side first. The printer automatically
detects the orientation of the picture, whether it’s portrait or landscape,
and prints accordingly. If the photo paper is loaded in the wrong
direction, the image will be cut off and the paper may jam. If the paper
is loaded with the wrong side up, the image quality will be affected.
4. Move the paper forward until it stops.
5. Move both the left and front paper-edge guides until they touch the paper.
6. Push in the paper tray until it clicks into place, and lower the output tray.
output tray
paper tray