Kodak OFFICE HERO 6.1 - Manual (Page 69)

www.kodak.com/go/aiosupport 63
KODAK OFFICE HERO 6.1 All-in-One Printer
Adjusting the settings and copying a document
To copy a document using settings other than the default settings:
1. Place the original document in the ADF or on the scanner glass.
2. Press Copy.
The Copy Document Options menu appears on the LCD.
3. Press to select an option, then press or to change the setting.
Copy Document
Option
Settings Description
Quantity 1 (default) to 99 The number of copies that print.
Original 1-sided The information you want to copy is
on one side of the page.
2-sided*
* You must load
2-sided originals in
the ADF (see
Using
the Automatic
Document Feeder
(ADF), page 46
)
The information you want to copy is
on both sides of the page.
Output 1-sided The copy is printed on one side of the
page.
2-sided The copy is printed on both sides of
the page.
Copy Size Same Size
(default) The copy is the same size as the
original.
Fit to Page The printer detects the size of the
original on the scanner glass and the
size of the paper in the paper tray, and
automatically reduces or enlarges the
original so that the copy fits on the
paper.
20% to 500% Reduces up to 20% or enlarges up to
500% of the original size.
Plain Paper Quality Normal
(default) Good quality output; prints faster than
Best.
Best The highest quality, but the slowest
print speed; eliminates the banding
effect that sometimes occurs.
Draft The fastest print speed, but the lowest
quality.