Kodak OFFICE HERO 6.1 - Manual (Page 86)

Scanning
80 www.kodak.com/go/aiosupport
Scanning from the computer
To scan a document or a picture:
1. Load the original.
2. Open Home Center Software, then:
• on a computer with WINDOWS OS, select Scan Documents and Pictures,
then follow the on-screen instructions.
• on a computer with MAC OS, select the Tools tab, click Scan Application,
then follow the on-screen instructions.
NOTE: If you are not using Home Center Software, open a program that allows you
to scan, then follow the instructions.
Scanning multiple pictures simultaneously
Using Home Center Software, you can scan multiple pictures simultaneously and
save them as separate files.
When scanning multiple pictures, leave space between the pictures so that the
printer can detect the separate pictures. Any pictures that overlap are interpreted as
a single picture.
Scanning multiple pictures when connected to a computer with WINDOWS OS
To scan multiple pictures simultaneously, and save them as separate files:
1. Lift the scanner lid, and place the pictures face down on the glass, leaving space
between the pictures.
2. Close the scanner lid.
3. Open Home Center Software, then select Printer Tools .
4. Under the Tools heading, select Printer Scan Settings.
5. Select the Picture tab.
6. Select Automatically Detect Pictures, if it is not selected, then click OK.
7. Click the X in the top right corner to close the Printer Tools window.
8. In the Home Center Software, select Scan Documents and Pictures.
9. Make sure that Picture is selected and Collage - Combine all pictures is cleared,
then follow the on-screen instructions.
NOTE: Click Help ( ? icon) for additional instructions.