Seiwa Starfish 2nd Edition - Manual (Page 48)

50 User Manual
MARLIN:
Event Handler Type : Selects the type as Normal or By Key. Selecting Normal allows placing the Event with a default
name; selecting By Key allows setting the desired number for the Event. The default setting is
Normal.
Position Symbol : Selects the icon of the fix position displayed on the screen between Boat and Standard. The
default setting is Boat.
STARFISH/STARFISH
E
/MARLIN/OYSTER:
3.5 ADD VIDEO MENU
This menu allows to see a Video Input picture in a window on the chart plotter
screen. This menu is visible only if an external video signal source is connected to
the chart plotter.
NOTE If the Video Input signals is not detected (E.g. the video Camera is not
connected to the Video Input connector), the ADD VIDEO function will be
greyed out.
[MENU] + "Add Video" + [ENTER]
Video 1 : Shows the image from the video camera 1 on a rectangular window, by moving the cursor keys you could
select where this window is placed.
Video 2* : Shows the image from the video camera 2 on a rectangular window, by moving the cursor keys you could
select where this window is placed.
NOTE* O
NLY
F
OR
OYSTER/MARLIN.
NOTE Once the Video Mode is active use the following keys to adjust video settings:
press and immediately release [POWER], use the [C
ONTR
+]/[C
ONTR
-] and
[B
RIGHT
+]/[B
RIGHT
-] soft keys to adjust contrast and backlight; move the
cursor up/down to adjust brightness and left/right to adjust colors, press
[ZOOM IN]/[ZOOM OUT] to adjust hue phase. Pressing any other key exits
from Video Mode.
3.6 NAV DISPLAY MENU
Allows selecting CDI Scale and Navigation Page fields. It is possible to display this
menu only if the Navigation Data page has been selected.
[MENU] + "Nav Display" + [ENTER]
CDI scale : Selects the CDI (Course Deviation Indicator) Scale among 0.2, 0.5, 1.0, 2.0, 4.0, 10.0 Nm.
Navigation Page : A new window appears with 3 items. Select the item you want to change and press [ENTER]: another
window appears, select the fields to display in the Navigation Data page among DST (Distance to
Destination), XTE (Cross Track Error), BRG (Bearing), STR (Steering), VMG (Velocity Made Good),
DPT (Depth), TTG (Time To Go), HDG.
3.7 ADVANCED OPTIONS MENU
[MENU] + "Advanced Options" + [ENTER]
The Advanced Options are arranged in sub-menus.
3.7.1 Input/Output Setup menu
WARNING
After every software upgrade the RAM is cleared and the chart plotter re starts
with the usual default settings. Please go to the Input/output menu and set
the proper input format once again.
OYSTER/EXPLORER 3 /SEAHORSE
E
/BARRACUDA/STARFISH
E
/MARLIN:
GPS Connection
Connect the GPS to the GPS Port (serial Port 3). To choose your preferred setting
follow the procedure: