Kramer Electronics SV-551 User Manual
Rc-sv configuration guide (rev 4), Kramer electronics, ltd
Kramer Electronics, Ltd.
RC-SV Configuration
Guide (Rev 4)
Software Version 2.1.2.69
Intended for Kramer Technical Personnel or external
System Integrators. To check that you have the latest
version, go to the DOWNLOADS section of our Web site
at:
This manual is related to the following products:
Table of contents
Document Outline
- 1 Introduction
- 2 Overview
- 3 Initial Planning
- 4 The RC Configuration Software
- 4.1 Installing the Software
- 4.2 Downloading and Installing the Drivers
- 4.3 Creating a Driver Command
- 4.4 Port Mapping
- 4.5 The Kramer RC-SV Configuration Main Window
- 4.5.1 The Tab Area
- 4.5.2 Scheduling
- 4.5.3 The RC Command Area
- 4.5.3.1 The IR, RS-232 and RS-485 Ports RC Command Area
- 4.5.3.2 The LIGHT RC Command Area
- 4.5.3.3 The Relay Port RC Command Area
- 4.5.3.4 The Switcher Port RC Command Area
- 4.5.3.5 The Keypad LCD Port RC Command Area
- 4.5.3.6 The Button Color Port RC Command Area
- 4.5.3.7 The Ignore Button Port RC Command Area
- 5 Creating a Macro
- 6 The Kramer RC Configuration Menus
- 7 Connecting the RC-6X Series Room Controller as a Standalone Device
- 8 Connecting via the ETHERNET
- 9 Writing a Configuration