Kramer Electronics SV-551 - Manual (Page 12)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The RC Configuration Software
8
Figure 4: Change Working Directory Window
6. Continue to run the setup according to the installation instructions.
4.2 Downloading and Installing the Drivers
Download and Install the Drivers
The RC system peripheral devices have device drivers that let them
communicate with computers. The device driver needs to be installed so that
the computer can recognize it and control it. The Kramer RC-SV
Configuration software uses driver commands to control these peripheral
devices.
4.2.1 Download the Drivers
Check—according to your list of peripheral devices (see the example in
Figure 1 ) —that you have all the required drivers:
• Kramer machines have drivers that are provided within the package
• Other peripheral device drivers that are included in the package
Download the required drivers to a folder (for example, C:\Media-Room-
1\Peripheral Device Drivers).
4.2.2 Install the Drivers
The peripheral device drivers are installed via the Driver Manager window,
defined in
Figure 8 and Table 2 :