Figure 53: load firmware upgrade window (rc-6x) – Kramer Electronics SV-551 User Manual
Page 46
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Kramer RC Configuration Menus
42
1. Choose the connection method according to the cable connection you have
made between the PC and your product.
3. Click OK.
4. Select the device for upgrade from the list box
5. Click the Browse button to find the firmware file.
.
Figure 53: Load Firmware Upgrade Window (RC-6x)
6. Connect to the device.
7. Click the Connect button to connect the device and then click Start Upgrade.
8. Upon completion, open the Device Properties window (see
) to make
sure the firmware was upgraded
.
1 When selecting a room controller device such as RC-6x, you have to select the connection method: Direct connection or
Connection via SV-551 via K-NET
2 If the firmware number remains the same, close the Device Properties windows, disconnect and then reconnect the device,
and open the Device Properties window again to check the firmware number