Kramer Electronics SV-551 - Manual (Page 7)

Overview
3
2 Overview
The RC-SV Configuration Software V2.1.2.69 is used to configure several
types of room controllers
1
Master Room controllers:
.
• SV-551 in a SummitView™ Essentials Kit for Europe or the US (the
SV-551 is defined as the Master and the room controllers are the auxiliary
devices)
Room Controllers that operate as auxiliary devices to a master room controller
or as standalone devices:
• RC-6x 2
7
Room Controller for Europe or the US (the room controller is
connected as a standalone unit and is defined as the master), see section .
• RC-2, RC-2C 3
and the RC-2C
3
• RC-52/RC-52N
combined with the PL-18
• FC-29 for learning IR commands 4
Section 3 , section 4 and section 5 apply to all the room controllers listed in
Table 1 , unless noted otherwise
Since each Room Controller includes different ports
5
, you will find that not all
the available commands
6
Table 1
apply to your Room Controller.
defines the sections that apply to each Room Controller:
Table 1: Room Controller Commands Available
The Commands [Section Number]
Machine
IR OUT
[
5.2.1 ]
RS-232
[
5.2.1 ]
RS-485
[
5.2.1 ]
LIGHT
[
5.2.2 ]
RELAY
[
5.2.3 ]
SWITCHER
[
5.2.4 ]
POWER
AMP [ 5.2.5 ]
KEYPAD
LCD [
5.2.6 ]
BUTTON
COLOR [ 5.2.7 ]
IGNORE
BUTTON
[
5.2.8 ]
SV-551 7 Yes Yes Yes Yes Yes Yes Yes Yes Yes
RC-6x 2 Yes Yes Yes Yes Yes Yes
RC-2 Yes
RC-2C Yes Yes Yes
RC-2C + PL-18 Yes Yes Yes
RC-52 / RC-52N Yes Yes Yes
1 For each machine, the installation process is described in the separate user manual. you can download the up-to-date
Kramer user manuals and guides from the Internet at this URL: http://www.kramerelectronics.com
2 Refers to the Kramer RC-62 and RC-63 families (European and US versions)
3 The RC-2C (RC-2) firmware version must be at 1573 or higher
4 The RC-SV Configuration software is used only for the purpose of IR learning and not for configuration
5 For example, RC-2 includes only an RS-232 port, so the other commands are not available for this machine
6 Section 4.5.2 describes the different command areas (some of which may not be available for your Room Controller)
7 As Part of the Kramer SummitView™ Essentials Kit and Standard Kit European and US versions)