Kramer Electronics SV-551 - Manual (Page 20)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The RC Configuration Software
16
To write a new IR command to the RC device:
1. Click the New button in the IR commands area to type the new command name.
The following window appears:
Figure 11: New IR Command Window
2. In the Command area, click the Connect to IR Capture Device button (see
Figure 13 ), select the port and click OK:
Figure 12: Connect to IR Capture Device Window
3. Click the Read IR button to read the command.
The command area displays the following message: “Ready for reading IR
command. Please send IR command to the device”.
4. Press the appropriate button on the remote control transmitter.
The command area displays the following message: “IR command reading”.
The IR command appears, as illustrated in
Figure 13 :