Kramer Electronics SV-551 - Manual (Page 6)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Introduction
2
1.1 Quick Start
To configure your Room Controller, follow these basic steps (see section 4 ):
1. Download the software from our Web site
at: http://www.kramerelectronics.com
2. Extract the ZIP file
3. Install the software application
4. Install the Kramer USB driver
1. Check, according to your list of
peripheral devices, that you have all the
required drivers
2. Download the required drivers to a folder
(for example, C:\Media-Room-
1\Peripheral Device Drivers)
1. In the Driver Manager window, select the
required driver from the Vendor, Device
and Revision areas
2. Create a command via the Serial
Command area or the IR Commands
area
Click the “Port Manager...” Item in the
Configuration menu and define as required