Kramer Electronics SV-551 - Manual (Page 37)

Creating a Macro
33
Figure 38: High Volume RC Command
5.2.6 An LCD Keypad Command
The LCD Keypad command lets you type-in the desired text to the LCD
displays (LCD 1 and LCD 2).
To write an LCD keypad command on an RC button, do the following:
1. Select the KEYPAD_LCD Port (1 or 2).
2. In the RC command area, write the command description (for example,
Switcher).
3. Type-in the desired text.
Figure 37 illustrates the RC Command area as it appears after writing the
command:
Figure 39: Keypad LCD RC Command