Festo Модуль перемещения HSP - Manual (Page 37)

HSP−...−AP/A S
Festo HSP−...−AP/AS 0508a English
37
5 Conditions of use
Please note
Incorrect handling can lead to malfunctioning.
S Make sure that the specifications in this chapter are always observed.
The product will then function correctly and safely.
S Please comply with national and local
safety laws and regulations.
S Please observe the prevailing ambient
conditions.
S Compare the maximum values in these
operating instructions with your actual
application (e.g. pressures, forces,
torques, temperatures, masses, speeds).
S Remove the packaging. The packaging is
intended for recycling. (exception: oiled
paper which must be disposed of ).
S Please observe the warnings and instructions:
ć on the product
ć in these operating instructions and
ć for the type HSP−...−...WR/WL: in the operating instruction for the
BWR−/BWL−HSP−...
S Use the product in its original state. Unauthorized modification is not perĆ
mitted.
S Make sure there is a supply of correctly
prepared compressed air.
S Maintain the selected medium for the
complete service life of the product.
Example: If non−lubricated compressed
air is used at the beginning, you should
always use non−lubricated compressed
air.
Fig. 4
[°C] [%] [mbar]
Fig. 5
LF−... LR−...