Festo Модуль перемещения HSP - Manual (Page 34)

HSP−...−AP/A S
Festo HSP−...−AP/AS 0508a English
34
2 Product overview
Basic design Variants
Types HSP−12−..., HSP−16−..., HSP−25−...
The handling module is supplied as stanĆ
dard in sizes 12, 16, 25 ready fitted with
the following function elements:
Ĉ Sub−base with variable fitting and
fastening possibilities 8
Ĉ 2 adjustable guide links for path
control via roller bearing guide 4
Ĉ 2 linear guides arranged in cross−form
Type HSP−...−AS
Handling module
without drive
2 linear guides arranged in cross form
(cross guide)
aB
Ĉ 2 stops in the end positions each with
a shock absorber (type ...−AS: with
rubber buffer) and a fastening rail for
proximity switches
2
Type HSP−...−AP
Handling module with
swivel module type
DSM−...
(double−acting,
pneumatic)
Options
Type HSP−...−...−SD
Handling module with protective cover
and side plates.
The design SD" is recommended for
stand alone mode.
Type HSP−...−...−WR/WL
Handling module with cylinder
BWR−/BWL−HSP−... (see also the chapter
Accessories") for withdrawing the
swivel lever into a waiting position above
the
Ĉ right−hand end position: type ...−WR
Ĉ left−hand end position:Ătype ...−WL