FUJITSU CentricStor V3.1D - Manual (Page 501)

U41117-J-Z125-7-76 501
Explanation of console messages Message lines
SXSM026 sma#: Voltage is too low
ALERT
Meaning
The voltage with ID is too low.
This message can also be triggered by faulty regulators, sensors, batteries or power
supplies.
Response
Notify maintenance staff.
SXSM027 sma#: Voltage is too high
ALERT
Meaning
The voltage with ID is too high.
This message can also be triggered by faulty regulators, sensors, batteries or power
supplies.
Response
Notify maintenance staff.
SXSM030 sma#: Warning temperature = degrees Celsius at sensor
ALERT
Meaning
The temperature of sensor is in the warning range.
If a further temperature increase exceeds a predefined limit value, a controlled shutdown
will be initiated by the monitoring software and the server deactivated.
A defective temperature sensor (see footnote on page 498 ) can also trigger this message.
Response
Notify maintenance staff.
SXSM031 sma#: Temperature Sensor is not working
ALERT
Meaning
Temperature sensor is defective (see footnote on
page 498 ).
Response
Notify maintenance staff.
SXSM032 sma#: Fan : Fan not available
ALERT
Meaning
Fan has failed.