FUJITSU CentricStor V3.1D User Manual
Page 466
466
U41117-J-Z125-7-76
Message lines
Explanation of console messages
SXPL003
PLM(#3): ALERT:
Meaning
It was not possible to send a message to the PDS
Response
Check whether the PDS and/or host are running and whether the TCP/IP connection is
okay. If the corresponding IDP is running but the connection is not working, check the cables
and the hubs. Notify maintenance staff if necessary.
SXPL004
PLM(#4): NOTICE:
Meaning
The PDS
SXPL005
PLM(#5): CRITICAL: Physical Library Server
Meaning
It was not possible to send a message to the PLS.
Response
Check whether the PLS is functioning.
SXPL006
PLM(#6): NOTICE: Physical Library Server
Meaning
It was again possible to send a message to the PLS.
SXPL007
PLM(#7): ALERT: VLM not reachable
Meaning
It was not possible to send a message to the VLM.
Response
Check whether the VLM is functioning (normally the VLM and PLM are running on the same
host).
SXPL008
PLM(#8): WARNING: hard minimum of free PVs (
reached
Meaning
There are almost no more free tapes. The reserve of free cartridges created during the last
“soft configuration” was not large enough. Only
is performed and is given high priority.
Response
If the reduced throughput is currently causing problems, mount new cartridges.
In the long term: check the settings that control reorganization by means of the GXCC
function “Physical Volume Groups” (see
).