FUJITSU CentricStor V3.1D User Manual
Page 210
210
U41117-J-Z125-7-76
Function bar
GXCC
VABC08,...,VABC031. If any volumes do not exist in the name range defined by the start
name and number specifications, then this is indicated in a ready message and the
operation is continued. Thus, in this example, the volumes VABC032 ff. would not be
moved.
This acknowledgement only indicates that the data maintenance system in VLM has been
modified accordingly. The storage location of each of the volumes is only changed the next
time that a save is actually performed. The time can be shortened by issuing reorganization
jobs for the physical volumes which have, until now, contained the images of the changed
logical volumes. This can be carried out by issuing an explicit call (see
Operations » Reorganize Physical Volumes” on page 228
) or by temporarily shortening the
refresh time (this can only be done in Service mode).
At the latest after the refresh time has elapsed all logical volumes will have been moved.
You can follow the progress of the action using
“Statistics » Physical Components » Reorga-
or
“Statistics » Logical Components »Logical Volumes
. Productive operation continues normally except for the
increased load caused by additional copy operations. Access to the moved volumes is also
possible at any time.
You can use the same procedure to move data inventories to other libraries and to other
media.
Buttons along the bottom border
OK
The process for changing the group affiliation of the volumes is started.
Cancel
The window is closed without any further activity.