FUJITSU CentricStor V3.1D - Manual (Page 455)

U41117-J-Z125-7-76 455
Explanation of console messages Message lines
Temporary unavailability of the FC
The following message complex, with LOOP-DOWN, rescheduling and LINK-UP
messages, is output:
SXFP041 fcpal (sadm): rescheduling after temporarily unavailable resource
None
SXFP041
fcpal (sadm): rescheduling on intr : unavailable resource
None
SXFP041
fcpal (sadm): skipping timer processing
None
Meaning
The FC configuration is being changed. Devices like PCs or RAID disk arrays are currently
being removed or added, or cables are being plugged in/removed.
Response
None if this state is temporary. However, after approximately 1 minute things should return
to normal. If this is not the case, notify maintenance staff.
9.2.8 SXFW... (Firmware)
SXFW001 Firmware update for device mbk timed out, device not responding.
ALERT
Meaning
Loading of the firmware could not be completed within a particular time.
Response
Notify maintenance staff.
SXFW002 Firmware update for device mbk failed.
ALERT
Meaning
Loading of the firmware could not be completed successfully.
Response
Notify maintenance staff.